Wednesday, January 25, 2012

Honda Civic Competition Series traction bar

RM990

- 100% Brand NEW

Product Details:
Honda Civic Competition Series Traction Bar.

Honda civic Competition Series Traction Bar Kit is designed to increase the rigidity and stability of the vehicle's front suspension. By tying-in the front lower control arms to the frame, the front suspension becomes more solid thus increasing traction and eliminating wheel-hop. For front wheel drive drag racers and road racers, this directly results in reduced 60-ft times and cornering speeds.

Honda civic Competition Traction Bar is powder-coated for durability and corrosion resistance, while the AL6061 radius arms are anodized.

Honda civic Competition Series Traction Bar will work with B-series or K-series motor swaps.
*May not fit with custom side-out headers or downpipes.


Vehicle Applications:
92-95 HONDA CIVIC
96-00 HONDA CIVIC
93-97 HONDA DEL SOL
94-01 ACURA INTEGRA

Sunday, January 22, 2012

GODSPEED NISSAN 240SX S13, S14, S15 MASSIVE ANGLE KIT

RM1200

The Godspeed Project massive angle kit is a direct fit kit without any modification to your stock oem knuckle piece. This massive angle kit is a ONE PIECE MADE kit, unlike most kits out there that are cut and weld with the oem steering knuckle. This is made by an oem manufacturer with oem quality material. Godspeed Project massive angle kit will give you more extreme angle on your S13, S14, or S15 without modifying the front lower control arm. The Massive angle steering kit will stop at exactly 55 degrees , if you modify the lower control arm bump stop this angle kit will give you additional 5 to 10 more degree (Depending on how you modified your bump stop)


We are confident in our product that we are offering a limited LIFETIME WARRANTY.


OEM knuckle vs. Godspeed Knuckle

Leading wheel: OEM is 38 degrees vs. Godspeed is 56 degrees

Trailing wheel: OEM is 30 degrees vs. Godspeed is 46 degrees

Turning circle (curb-to-curb): OEM is 30.1 feet vs. Godspeed is 23 feet

Lock-to-Lock: OEM is 3 turns vs. Godspeed is 2.6 turns


***Note: For S13 240sx customers this must be use with a s14 240sx wheel hub.

Also included is (2) 7mm spacers to go into the inner tie rod to be used with this kit****

Saturday, January 21, 2012

Sunday, January 15, 2012

Turbo S header for GSR 4G93 standard turbo TD04

RM880

- 100% Brand NEW
- For GSR 4G93
- TD04 flange (ori turbo)
- Thickness: 3mm
- Material: Stainless steel
- Brand: Turbo S

Super 90 Throttle Body - Mitsubishi



- 100% Brand NEW in BOX
- Original S90 throttle body
- 70mm
- Fit to:
4G63T
4G92/93
EVO123& Many More

Designed by S90, These series of direct bolt-on throttle body are precicion CNC - machined from AL6061 - T6 billet aluminium and hard anodized for increased durability. The throttle shaft and blade assembly are made from AL7075-T6 seprately to increase horsepower and torque by optimizing airflow to your engine.

Saturday, January 14, 2012

Super 90 Throttle Body - Honda


- 100% Brand NEW in BOX
- Original S90 throttle body
- 70mm
- Fit to:
B16A ,B1B
B18A, B18B, B18C
H22A, H23
F20A, F22A, F20B
D15B, D16A (Sohc)
& Many More.

Designed by S90, These series of direct bolt-on throttle body are precicion CNC - machined from AL6061 - T6 billet aluminium and hard anodized for increased durability. The throttle shaft and blade assembly are made from AL7075-T6 seprately to increase horsepower and torque by optimizing airflow to your engine.

Forged Racing High Pressure 1.3 Bar Radiator Cap

RM59

- 100% Brand NEW in BOX
- Original Forged Racing radiator cap
- small and big head
- 1.3 bar

GREDDY PRofec B-Spec II


- electronic boost controller
- built in Boost gauge (kPA or PSI)
- 2 preset setting(Lo. & Hi.) Set %
- to increase boost
Gain %
- wastegate response adjustmentStart Boost
- inital boost response adjustment
Warning point, warning limiter, peak-hold/Last boost
compatiable with Remote Switching System (to swich from Lo. to Hi)

The PRofec B-Spec2 integrates all the basics of an electronic boost controller, with additional useful options. Use the built-in boost gauge (psi or kPa) to tune in a Lo. & Hi. SET % to raise the boost pressure, then optimize consistency and response with GAIN % and adjust the START GAIN to set initial wastegate response. Also built-in are optional: Warning point, Warning limiter, and peak & last boost record. Compatible with integral and external wastegates and our RSS or SCC’s optional speed trigger.

GREDDY remote switching system

RM750
- 100% Brand NEW in BOX
- Original Greedy product.
- Limited unit only.
- Fit to PRofec, e-Manage, Ultimate, or 5V/12V RSS adapter.

Our Remote Switching System (RSS) allows the user hands-free modulation between high boost and low boost settings on either of our PRofec boost controllers. It can also be used as a momentary switch for nitrous, line lock, etc., when used with our optional voltage adapter kits.

GReddy’s Multi Switching System (MSS) is a two-channel programmable general output controller. The MSS is cockpit-mounted and wires into a vehicle’s ECU harness and/or optional GReddy sensors and the electronic devices you want to control.

Tuesday, January 10, 2012

MUGEN Power Air Box with Simota Filter for EG EK

RM200

- 100% Brand NEW
- Mugen Power air box (fibre)
- For Civic Eg and EK
- Simota washable air filter
- Can fit to Mitsubishi 4G9X

Monday, January 9, 2012

TD04h TD04 turbocharger repair kit

RM100

- 100% Brand NEW in BOX
- TD04h/TD04 turbocharger repair kit (gsr turbo/pajero)
- Diesel or Petrol

RHF4 turbocharger repair kit

RM120

- 100% Brand NEW in BOX
- RHF4 turbocharger repair kit

TD05 16G Standard EVO3 turbocharger repair kit

RM120

- 100% Brand NEW in BOX
- TD05 16G (standard EVO3 Turbo) turbocharger repair kit

T25 T28 turbocharger repair kit

RM150

- 100% Brand NEW in BOX
- T25/T284 turbocharger repair kit

# Visit our showroom at Pandan Indah.

- Price are without installation.

Payment method: bankin/cash/credit card/paypal/online transfer/atm transfer/ western union
Dealing method: COD/Poslaju/Parcel sevice
Location : 22M,Mezzanine Floor, Jalan Pandan Indah 1/23A, 55100, Pandan Indah, KL
Proof : Will provide a offical receipt
Working Hour: 11AM-9PM (monday to saturday)

Contact No:016-3234991/0146401073/03-92268921

Saturday, January 7, 2012

Perdana Rear adjustable arm


- 100% Brand NEW in BOX
- Perdana rear adjustable arm
- Complete set

# Visit our showroom at Pandan Indah.

- Price are without installation.

Payment method: bankin/cash/credit card/paypal/online transfer/atm transfer/ western union
Dealing method: COD/Poslaju/Parcel sevice
Location : 22M,Mezzanine Floor, Jalan Pandan Indah 1/23A, 55100, Pandan Indah, KL
Proof : Will provide a offical receipt
Working Hour: 11AM-9PM (monday to saturday)

Contact No:016-3234991/0146401073/03-92268921