Monday, October 10, 2011

JASMA RACING CONNECTING ROD

RM690-990

JASMA RACING CONNECTING ROD

H-BEAM, I-BEAM, A-BEAM & X-BEAM
FORGED 4340 CHROME MOLY STEEL ROD


JASMA® Toyota 3S-GE & 3S-GTE H-beam con rod model 31068 ......RM920
Price Quoted For 4 pcs with 8740 bolts

JASMA® SR20 Series H-beam con rod model 31057 ......RM920
Price Quoted For 4 pcs with 8740 bolts


JASMA® Kelisa/Kenari H-beam con rod
model 31071.................................................................RM690
Price Quoted For 3 pcs with 8740 bolts Note : 3pcs


JASMA ® Kelisa/Kenari L9 & L7 H-beam con rod
model 31118..................................................................RM920
Price Quoted For 4 pcs with 8740 bolts


JASMA® Campro 1.3 H-beam con rod
model 31069..................................................................RM920
Price Quoted For 4 pcs with 8740 bolts

JASMA® Subaru EJ18, EJ20, EJ22 & EJ257
( WRX STi ) H-beam con rod model 31072...................RM920
Price Quoted For 4 pcs with 8740 bolts

JASMA® 4G15 H-Beam con rod model 31073...............RM920
Price Quoted For 4 pcs with 8740 bolts


JASMA® 4G93 pin size 21mm H-Beam con
rod model 31048............................................................RM920
Price Quoted For 4 pcs with 8740 bolts

JASMA® 4G93 pin size 19mm H-Beam con
rod model 31051............................................................RM920
Price Quoted For 4 pcs with 8740 bolts

JASMA® 4G93 GSR, Mazda B6/B8, CA18
pin 20mm H-Beam con rod model 31056.......................RM920
Price Quoted For 4 pcs with 8740 bolts

JASMA® 4G91/4G92 SOHC/DOHC H-beam
con rod model 31070.......................................................RM920
Price Quoted For 4 pcs with 8740 bolts
Center to Center Shorten By 2.7mm. Lower Compression



JASMA® 4G63 VR4 1st Generation pin size 21mm
H-Beam con rod model 31055.........................................RM920
Price Quoted For 4 pcs with 8740 bolts

JASMA® 4G63 2nd Generation evo 1-9
pin size 22mm I-Beam con rod model 31050.................RM920
Price Quoted For 4 pcs with 8740 bolts

JASMA® 4G63 2nd Generation Evo 1-9
pin size 22mm X-Beam con rod model 31062................RM920
Price Quoted For 4 pcs with 8740 bolts
Note : For Extreme Power ( Heavy Duty )

JASMA® 4G63 2nd Generation Evo 1-9
pin size 22mm H-Beam con rod model 31074.................RM920
Price Quoted For 4 pcs with 8740 bolts

JASMA® 4G63 Combo pin size 22mm H-Beam
con rod model 31049.........................................................RM920
Price Quoted For 4 pcs with 8740 bolts
( 2nd Generation Piston on 1st Generation Crank
or 2nd Generation Stroker Piston on 4G64 Crank )
1st Generation = VR4
2nd Generation = EVO

JASMA® B16A H-Beam con rod model 31054....................RM920
Price Quoted For 4 pcs with 8740 bolts

JASMA® B16A I-Beam con rod model 31063...................RM990
Price Quoted For 4 pcs with 8740 bolts

JASMA® B18A/B & B20B/Z H-Beam con rod
model 31052........................................................................RM920
Price Quoted For 4 pcs with 8740 bolts

JASMA® B18A/B & B20B/Z I-Beam con rod
model 31065........................................................................RM990
Price Quoted For 4 pcs with 8740 bolts

JASMA® B16B H-beam con rod model 31061.....................RM920
Price Quoted For 4 pcs with 8740 bolts

JASMA® K20A I-Beam con rod model 31066...................RM990
Price Quoted For 4 pcs with 8740 bolts

JASMA® K20A A-Beam con rod model 31067...................RM990
Price Quoted For 4 pcs with 8740 bolts

JASMA® B18C H-Beam con rod model 31053....................RM920
Price Quoted For 4 pcs with 8740 bolts

JASMA® H22 H-beam con rod model 31047.......................RM920
Price Quoted For 4 pcs with 8740 bolts

JASMA® Toyota 4E(1000cc) L2/L6/L7/L9 H-Beam con rod model 31058.............RM690
ANY EJ ENGINE CODE WITH 1000CC BLOCK
THIS CANNOT FIT [ JB ]ENGINE CODE
CANNOT USE ON KENARI /KELISA ENGINRE
Price Quoted For 3 pcs Note : 3pcs
Note : Can Use For L2 Head With Kelisa block

JASMA ® Toyota 4E H-Beam con rod model 31119............RM920
Price Quoted For 4 pcs with 8740 bolts

JASMA® Toyota 4E I-Beam con rod model 31059............RM740
Price Quoted For 3 pcs Note : 3pcs
Center to Center Shorten By 0.7mm Lower Compression

JASMA® 4AG H-beam con rod model 31060.....................RM920
Price Quoted For 4 pcs with 8740 bolts
Note :
C-to-C Length : 122mm
Big End Diameter : 43
Pin End Diameter : 20mm Original Pin End Diameter is 18mm
Pin End Width : 21.85mm
Big End Width : 21.85mm


#Note : Made In Taiwan , From The Same Factory That Supply To The Big Company In South American.
Just To Name A Few Like Pro-Comp, Scats, Arrow & Nitto In Australia.


Rods Features:
- Material: Precision forged 4340 EN24 aircraft chrome moly quality
steel.
- Hardness after quenching and tempering is HRC35-38.
- 3-D design offers the advantages of reduced weight without
sacrificing strength.
- 2 piece forging for increased strength.
- Silicon bronze bushings for floating piston pins.
- Each forging is X-rayed, sonic tested and magnafluxed.
- Special Dowelled Cap for precision alignment.
- Shot peened to relieve stress.
- Fully CNC machined on all surfaces to produce the lightest and
strongest rod.
- Forged Billet 4340 aircraft quality steel

Machining Tolerances:
Big End and Small End Tolerance: <= +/-0.00017"
Verticality, Parallelism and Distortion: <= +/-0.00018"
Center to Center Distance Tolerance: <= +/-0.001"
Sets weight matched to +/-1 gram.

Sunday, October 9, 2011

JASMA Titanium Racing Head Studs - ARP style


JASMA TITANIUM RACING HEAD STUDS ( ARP STYLE )

Description:
Essential for high performance head-to block sealing, reduce cylinder head movement in high boost or high compression engine, Jasma Racing Head Studs are manufactured from titanium alloy that is rated far superior to "aircraft" quality with
yield stregth 230,000psi & 260,000psi tensile strength and come complete with 12 point nuts and washer. Nano-Ceramic hardening coating treatment on all fasteners surface which have excellent high hardness, anti-corrosion, wear-resistance & strong anti-scratch. Gray color coating appearance after Nano-Ceramic treatment. Manufactured with hex broach end for ease of installation.

# PREVENT BLOWN HEAD GASKETS
# AND ENSURE OPTIMUM SEALING

JASMA® titanium head studs 4G93 model 31019 RM360
Application : 4G93 NA & Turbo

JASMA® titanium head studs L2 model 31020 RM330
Application : L2 & L2 With Kelisa Block

JASMA® titanium head studs 4G63 model 31018 RM380
Application : Evo 1-9
Fits 2003-2006 Mitsubishi Lancer Evolution VIII / IX 2.0L Turbo 7-Bolt 4G63 Engines
Fits 1993-1999 Mitsubishi Eclipse GST / GSX 2.0L Turbo 7-Bolt 4G63 Engines
Fits 1993-1998 Eagle Talon Tsi 2.0L Turbo 7-Bolt 4G63 Engines

Material For Head Stud : Gr5 Titanium
Material For Head Nut : Gr5 Titanium
Material For Head Washer : Gr5 Titanium

Edelbrock Victor X intake manifold B Series

RM680

- 100% Brand NEW in BOX
- Edelbrock Victor X intake manifold
- Civic B Series - B16/B18

Optimized for maximum power from 7,000 to 10,000 RPM, the Victor X manifold is designed for turbo and all-motor applications. Engineered for high performance and race set-ups, this manifold has four additional bosses for nitrous or added fuel injectors.

Spoon - Civic EG,EK Front Strut Bar

RM210

- 100% Brand NEW
- Spoon Civic EG,EK Front Strut Bar
- Fit to Civic EG and EK.

Monday, October 3, 2011

Mines adjustable cam pulley B16/B18/K20A/H22A/SR20/L2/L5/Waja/Gen2/EVO123/RB25

RM150/pc
- 100% Brand NEW in BOX
- Mines adjustable cam pulley
- T7 Aluminium
- Model: B16/B18/K20A/H22A/SR20/L2/L5/Waja/Gen2/EVO123/RB25/26/4G15/MX-6/Levin 20V/ silver top/Black top
- Selling very cheap
- price is nett
- price is for 1pc
- Limited stock

VR Billet Valve cover for Toyota 4EFTE

  VR Billet Valve cover for Toyota 4EFTE - ORIGINAL VELOCITY RACE VR PRODUCT - MADE FROM T6061 ALUMINUM AND MACHINED FROM A BLOCK - ADD A ST...