Tuesday, June 28, 2011

JASMA EG/EK/EJ center roll joint

RM110

- 100% Brand NEW in BOX
- Price quated for 2pcs
- Made in Taiwan

JASMA Racing CENTER ROLL Extended Ball Joint

JASMA Honda Suspension performance

Description:
The extended ball joints are designed to replace the OEM ball joint inside the front knuckles (applicable to EG/EK/DC2).
When a vehicle is lowered, the geometry of the front suspension changes accordingly. The more you lower your vehicle, the more the angles are increased. This change could result in some problems related to camber and caster, steering response, stability, handling and cornering performance. With the extended ball joints, the angles of the front knuckles and lower control arms are able to be repositioned and corrected.
Due to the reposition and correction in the suspension’s geometry, you will feel improvement in response and handling, and increase in tire contact patch and tread life.
Direct factory replacement part.
FITMENT :
96-00 Honda Civic
92-95 Honda Civic
94-01 Acura Integra
96-01 Acura Integra Type R
# Adjustable Camber for the Front Align your tyres for maximum grip or minimum tyre wear.
# Easy to install- Simply Remove and Refit!
# High quality and best choice to Strength Chassis !

Saturday, June 25, 2011

ASMA Toyota AE86 turbo header T4 flange banana

RM580

- JASMA Toyota AE86 turbo header T4 flange banana
- model 29184

- JASMA has released their all new stainless steel high flow headers. These headers features 1/2 inch thick flanges with a " true merger " collector. These headers will produce about 14-25 horsepower. The headers are complete polished. Each headers features a highly engineered collector to keep your turbo spooling faster then stock while creating additional horsepower and toque. In addition to improving performance, the header also change the tone of your vehicle. Adding a deeper sound and making the turbo whistle more audible.

Wednesday, June 22, 2011

JASMA AE86 4AGE Cast Iron Turbo Manifold

RM380

- 100% Brand NEW
- Toyota Corolla AE86 4AGE Cast Iron Turbo Manifold
- model 27282

# Black Cast Iron Turbo Manifold
# Higher Resistance to Heat
# Allows Power Steering and Air Conditioning
# Fits with T25 housing Type Turbo
# Direct Bolt on Manifold
# Professional Installation Highly Recommended.
# Fitment: 84-86 Toyota Corolla GTS AE86 (4AGE engines)

Rear upper camber arm A31, 180SX, S13, R32

RM250

- 100% Brand NEW in BOX
- Rear upper camber arm A31, 180SX, S13 & R32
- model 30369

JASMA have just released the perfect rear camber solution for lowered s13! If you have lowered either, your rear camber is off and the best solution for the correct suspension setup is GODSPEED'S New Rear Camber Adjusters complete with Rod-Ends. Designed for race-precision adjustments and long service life, these rear camber adjusters are equipped with hemispherical rod-ends that allow incredibly controlled rear suspension travel & predictable response. They also improve handling and allow for even tire wear!

JASMA aluminium radiator Saga Iswara

RM290

- 100% Brand NEW in BOX
- JASMA aluminium radiator for Saga/Iswara
- for manual transmission only.
- thickness 42mm.
- 30% more cooling capacity than OEM radiator
- top and bottom tank

Rear lower support bar A31,180SX, S13, S14,S15

RM170

- 100% Brand NEW in BOX
- Rear lower support bar A31, 180SX, S13, S14 & S15
- model 30371

JASMA rear lower support bar connects to the rear left and right lower control arm to provide unnecessary flex from the rear suspension. This will ensure you better handling. The tension on this rod can be adjusted which will increase more rigidity & stability in the rear lower suspension during high speed hard / sharp cornering

Rear upper camber arm S14, S15, R33, R34

RM250

- 100% Brand NEW in BOX
- Rear upper camber arm S14, S15, R33 & R34
- model 30370

JASMA have just released the perfect rear camber solution for lowered s14,S15! If you have lowered either, your rear camber is off and the best solution for the correct suspension setup is GODSPEED'S New Rear Camber Adjusters complete with Rod-Ends. Designed for race-precision adjustments and long service life, these rear camber adjusters are equipped with hemispherical rod-ends that allow incredibly controlled rear suspension travel & predictable response. They also improve handling and allow for even tire wear!

Saturday, June 11, 2011

Original K&N Stock Replacement Air Filters for all cars.




- All are 100% Brand NEW in BOX
- Original K&N air filter (Made in USA)
- Beware of imitation K&N filter.
- If you are looking for any type of K&N filter, please do contact us. We have various type of filter.
- Also purchase the cleaner kit for only RM75 (cleaner&oil)

# High Air Flow with Excellent Filtration
# Designed to Increase Horsepower and Acceleration
# Washable and Reusable
# Will NOT Void Vehicle Warranty
# Lasts up to 50,000 miles before cleaning is required depending on driving conditions
# K&N Million Mile Limited Warranty®
# Emissions Legal in all 50 US States.
# Economical, a K&N Air Filter Will Last the Life of Your Automobile, Motorcycle, or ATV
# Works with Original Equipment Manufacturer Vehicle Electronics
# Easy High Performance Add-on
# Environmentally Friendly

Tuesday, June 7, 2011

JASMA complete set intercooler and piping for Wira/Satria swap EVO 1-3, GSR,VR4

RM990/RM1150

- 100% Brand NEW in BOX
- Available in 2" (RM990) and 2.5" (RM1150)
- Complete set with intercooler, aluminium piping, silicone hoses, and t-bolt.
- Suitable for Wira/Satria swap to EVO123,GSR,VR4 engine.
- Intercooler size: 500*290*70*2"/2.5"
note: intercooler bigger then original intercooler size.

VR Billet Valve cover for Toyota 4EFTE

  VR Billet Valve cover for Toyota 4EFTE - ORIGINAL VELOCITY RACE VR PRODUCT - MADE FROM T6061 ALUMINUM AND MACHINED FROM A BLOCK - ADD A ST...